{"id":2533,"date":"2022-11-01T12:00:55","date_gmt":"2022-11-01T16:00:55","guid":{"rendered":"https:\/\/passportoverland.com\/?p=2533"},"modified":"2023-01-07T20:42:16","modified_gmt":"2023-01-08T01:42:16","slug":"the-best-truck-camper-setup-for-my-dodge-dakota","status":"publish","type":"post","link":"https:\/\/passportoverland.com\/the-best-truck-camper-setup-for-my-dodge-dakota\/","title":{"rendered":"The Best Camper Setup For My Dodge Dakota"},"content":{"rendered":"\n
\"The<\/figure>\n\n\n\n

Like in life, modifying and building a truck camper setup comes with trade-offs. My camper build is no different. After my first trip, I realized quickly how important headroom is when you are getting into and out of the truck. So, that became my first priority. <\/p>\n\n\n\n

My second priority was to have storage under my bed and in as many places as possible so I could be comfortable when I was in my truck for the night. The third priority was to make it portable as I need to use my truck for, well, truck duties around my home. <\/a><\/p>\n\n\n\n

I believe that I captured all three of those requirements with this build. As I am new to truck camping and eventually overlanding, I researched what has now become my ‘modular-style’ camping setup. I found a nice video from Levditti which I shared in my previous post which you can view in my recent post, Back to the Drawing Board post<\/a>. <\/p>\n\n\n\n

Following the aforementioned design by Levi at Levditti, my build included two major parts, the camper bed, and the camper storage. <\/p>\n\n\n\n

The Truck Camper Bed Setup<\/h2>\n\n\n\n

For the camper bed, I created a floor template and removed excess wood to lighten the load. See the first image in the gallery. Once this was complete I set out to create the bed frame using 3\/4-inch plywood. I purchased 3 full sheets of plywood at the best grade that I could afford for this project. I realized that the better grade looks better and more finished while being easy to work with. <\/p>\n\n\n\n

After completing the bed frame I made a ‘sliding drawer’ to fit snugly into the frame. This took some time but I was able to make it without too much difficulty. It slides fairly easily and will get easier after applying some wood wax and after many uses. I just didn’t want it to fit loosely at the beginning knowing that over time the fit will loosen up. <\/p>\n\n\n\n

The drawer will house my stove, all my cooking utensils, and dry foods for the trip. Because the drawer is only fills about 3\/4 of the length of the bed, I left an opening to store my extra 3-season tent…just in case.<\/p>\n\n\n\n

Along the left side, I created two pocket compartments one to place dirty shoes and socks and the back compartment for truly miscellaneous and infrequently used loose items. <\/p>\n\n\n\n

On the right side of the camper, I have placed a channel to support a divider piece between the bed and the storage system. This divider piece provides extra width for my bed if I need it. <\/p>\n\n\n\n

I enclosed the entire system with top-facing doors. Therefore, I am able to access the drawer from inside and outside of the truck. Easy access from inside and outside of the truck was something that Levi from Levditti strongly encouraged when creating your camper setup. <\/p>\n\n\n\n